Reserved Area


The conveniently smart automatic dispenser


Experience the FIRST1-TX, the economical, automatic dispenser from COROB. Robust, yet affordable, this automatic dispenser is designed to make manual tinting a thing of the past. It is the perfect replacement or addition to your current manual dispenser.

The innovative technology behind COROB™ FIRST1-TX is perfect for markets where there is a need for an easy and intuitive automated tinting process, providing an accurate and repeatable result.

Base Dispenser Features
Dispensing technologyBellow pump
Dispensing flowSequential
Canister configurationsUp to 16
Canister sizes [l] (q-G)2,5 (2.64 q)
Canister materialPolypropylene
Circuit flow rate [l/min]*0,2
Minimum dispensed quantity [fl.oz.] (cc)*1/384 (0,077)
Valve typeMembrane valve
Nozzle closure systemSingle valve
Pump type'F1-STD' Bellows
Electronic generation/type4G
Colorant base compatibilityDecorative: Water, Universal
Shelf typeManual "pull out"
Can Handling Features **
Minimum can height [mm] (in)130 (5.1)
Maximum can height [mm] (in)375 (14.8)
Minimum can diameter [mm] (in)70 (2.8)
Maximum can diameter [mm] (in)320 (12.6)
Minimum hole diameter [mm] (in)25 (0.8)
Power Supply / Machine Environment
Power supply [V] -- Frequency [Hz]Single phase 100 - 240 ±10% -- 50/60
Maximum power absorption [W]60
Dispenser Dimensions
Length [mm] (in)840 (33.0)
Depth [mm] (in)1003 (39.5)
Height [mm] (in)1242 (48.9)
Footprint [m2] (ft2)0,84 (9.07)
Machine Weight [kg] (lb)75 (165)

* Values highly affected by nature of the colorants and their rheological properties.

** IMPORTANT: most machine and paint can dimensions refer to the basic machine model. Options and alternative devices can change these values.
Please check with your local sales representative or contact one of COROB’s offices.

Data refers to base configuration machine, figures may vary according to different specifications.

FIRST1-TX Brochure
FIRST1-TX Data sheet


Preset turntable configurations of 12 or 16 canisters are available. The turntable is controlled and managed with the latest generation of simplified electronics reducing component complexities. The overall height of the machine allows for simplified refilling of colorants and easy access to all the controls.


A long-lasting 0,05 cc PTFE bellow pump delivers a dispensing flow rate of 0,2 liter/min. The pumping action is driven by a compact cam that is activated by a single actuator motor.


The innovative nozzle design used in FIRST1-TX is the result of research and innovation derived from the most advanced COROB™ product lines. The technology allows for accurate color dispersion while safeguarding against water-based colorant drying. Each nozzle can be easily reached, removed and cleaned under water for optimal machine performance and colorant dispersion.


The smart design of this dispenser is a unique selling point with an incomparable advantage to each customer. The transportation costs are beneficially impacted by the fact that the packing of this unit is extremely small and bundled. This makes the overall cost of the machine very low as from the very moment it leaves the factory all the way along its lifecycle.
The overall limited quantity of components and the simply operated parts are another assurance of even more low operating costs, with the maintenance reduced to the very minimal.


icon easy setup


The compact design and the lower base fitting into the upper part for transport are positively affecting transport costs.

icon ideal ownership cost


The everlasting bellow pump, free from wear and tear due to the lack of mechanical stress between the pump and colorant, lasts for a lifetime without needing to be changed.

icon operator friendly


The easy instructions and working cycle make the unit usable with a very limited learning curve speeding up the tinting process for the end customer.

icon maintence over time


The streamlined design of FIRST1-TX reduces the overall number of components, resulting in fewer parts that require maintenance for greater savings over time.