Reserved Area


Excellence in gyroscopic mixing

Introducing the new high-end mixer, COROB™ CLEVERmix 700 is pure performance matched to advanced control systems, in a smart design.

  • CLEVERmix 700
Base Features
TypeGyroscopical mixer
Clamping functionAutomatic [Pre-set or automatically selected]
Plate positioning after mixing cycleAutomatic
Mixing time (min)Automatic [depends on can size]. Manual set from 30 s to 20 m [up to 40 m with tech configuration]
Mixing speed (rpm)*Pre-set or automatically selected [Variable customization possibilities]
Mixing motor power [hp] (kW)0,75 (0,55)
Working cycleIntermittent periodic duty 70%
Mixing directionBi-directional
Can Handling Features
Type of cansRound / Square / Oval
Minimum can height [mm] (in)100 (3.9)
Maximum can height [mm] (in)400 (15.8) (max height will be reduced if can centering holder is used)
Maximum can diameter [mm] (in)390 (15.4)
Maximun can weight [Kg] (lbs)35 (77)
Power Supply / Machine Environment
Power supply [V]Single phase; 200-240±10% (with autotransformer 100/110/127V; at 200V power reduction applies)
Frequency [Hz]50/60
FusesF 10 A
Maximum power absorption [W]1050
Overall Dimensions
Length [mm] (in)805 (31.7)
Depth [mm] (in)782 (30.8)
Height [mm] (in)1112 (45.3)
Footprint [m2] (ft2)0,63 (6.78)
Machine Weight [kg] (lb)163 (360)
CertificationCE / UL

* Mixing speed can vary in function of weight, can shape and base paint characteristics.
Data refers to base configuraton machine, figures may vary according to different specifications.

CLEVERmix 700 Brochure
CLEVERmix 700 Data sheet


Know-how, field experience and some very successful COROB mixer models have been blended into the design of the CLEVERmix 700, making it one of the most advanced gyroscopic mixers on the market.

CLEVERmix 700’s main function is to mix in the most effective and proper way a wide selection of products, coming in various types of can materials and sizes.

An intelligent control system manages clamping pressure, speed and time according to configurable parameters, at the same time an operator can equally intervene with changes.


The quality of the materials and the technical solutions incorporated into the new design, set this unit apart from competition and guarantee an effective long term working partner:

  • Rotating mechanism with splashguard protection.
  • New power efficient motor, same performance… lower consumptions.
  • Vibration free movement and silent operating sound levels.
  • Lower plate ‘foot paddle’ release.


Typical issues related to the use of gyroscopic mixers have been addressed during the development of the CLEVERmix 700, resulting in an incredible low operating cost machine. A clever design engages in an easy servicing approach:

MOTOR No top cover blocking the motor for Service personnel to access.
INVERTER In the new position, it is visible and accessible from the front, once removed the back panel.
BELT Only one fixing point, so to allow for an ‘easy to remove’ part.
KEEPING CLEAN Two plugs on the bottom plate that can be opened for cleaning with water.